Hello，Welcome To(Taiwan) PERFECT International GroupDongguan PERFECT Instrument Co., Ltd.！
400-6677-223
National Advisory Service Hotline
Products center
Contact
Dongguan PERFECT Instrument Co., Ltd.
Service hotline：400-6677-223
Tel：+86-769-85818235、85831561、85831562
phones：13925560690、18929474643
Service line：+86-769-88033026
Fax：+86-769-85818236
Operation center：2 plant,ShiMeiShangLian temple,WanJiang Area,Dongguan
Manufacturing center：Houjie town of Dongguan City -- the material testing machine center
Changping Town, Dongguan City -- the manufacturing center of the simulation environment test machine
Website：www.zjhongdun.com
Your Current locations ：Home
» Simulation Environment Series
» 2098 cold and hot impact test box (two cases)
- PT-2098 thermal shock test machine (basket)
And cold impact tester Hot (mobiles, type two-cased)
PT-2098 thermal shock test machine (basket) product use;
Thermal shock machine can be used to test the structure of the material or composite material, in an instant by a very high temperature and low temperature continuous environment can bear degree of to in the shortest time test its due to thermal expansion and contraction caused by the changes of chemical or physical damage. Applicable objects including metal, plastic, rubber, electronic... And other materials, to improve their products as the basis or reference.
PT-2098 thermal shock test machine (basket) product features;
The best structure design, ensure the test area to move smoothly
The new PWM refrigeration control technology for low temperature 40% energy saving operation
Communication configuration RS232 interface and USB storage curve download function
Multi station alarm monitoring, configuration wireless remote alarm function
Impact test move within 5 seconds can be consistent with MIL, IEC, JIS specification
Expandable: LN2V liquid nitrogen rapid cooling control device
The world's first ultra temperature protection and set the conditions for the protection of the protection function
Device for multiple protection, Error fault table software- PT-2098 thermal shock test machine (basket)
Product model
PT-2099A
PT-2099B
PT-2099C
PT-2099D
PT-2099E
Studio size(mm)
400×350×350
500×500×400
600×500×500
700×600×600
800×700×600
Appearance size(mm)
1400×1650×1650
1500×1900×1750
1600×1950×1850
1700×2400×1950
1800×2600×2000
Temperature range（℃）
-20℃、-40℃、-70℃、-80℃~250℃
Impact range（℃）
0℃、-20℃、-40℃、-60℃~80℃、100℃、150℃、
Temperature fluctuation（℃）
±0.5℃
Temperature uniformity（℃）
≤±2℃
Heating rate（℃）
3℃~5℃/min (Empty)
Cooling rate（℃）
1℃~2℃/min (Empty)
High and low temperature switching time
≤10S
High and low temperature recovery time
≤5min
Test case specification
Three box test type
Cooling system
Air cooling or water cooling
Temperature control system
Import LCD5.7 inch new color LCD touch controller
Refrigeration system
The original "Taikang", "GuLun", "bize'er compressor" (Group)
Refrigeration mode
Air cooling
Heating system
Nichrome wire type, heater, UL shaped stainless steel plating heater
Liner material
ＳＵＳ＃３０４Stainless steel plate
Shell material
Spray galvanized color steel plate
Heat preservation material
Ultra fine glass fiber insulation cotton
Structure
The upper part of the low temperature chamber, the middle for the studio, the lower part of the high temperature chamber. Sample does not move in the studio, the high and low temperature impact the gas damper dynamic switching to automatic switching, the cabinet is arranged on the upper right corner of the control, easy to operate.
Protection system
1 test products over temperature protection (independence)
2 with no fuse protection switch
3 heater over temperature protection switch
4 compressor overload
5 compressor high and low voltage protection
6 system over current protection device
The 7 controller set and display the fault diagnosis.
8 cooling water pressure is too lowStandard configuration
1 power line 4 mm - X5 core, low impedance rubber cable 3M 1
2 electrical schematic diagram of the equipment
SUS #304 type 3 stainless steel plate punching rack 2
4 stainless steel adjustable spacing rack rail group 2
5 energy-saving lamps 1
The 6 body left psi 50mm test holes of the 1 of 1 stainless steel cover, silicone plug 1.
7 standard test with meteorological gauze 1 volume
8 fuses (wearing parts)
9 a set of operating instructionsMeet standards
1, GB/T2423.1-1989 low temperature test method;
2, GB/T2423.2-1989 high temperature test method;
3, GB/T2423.22-1989 temperature change test
4, GJB150.5-86 temperature impact test;
5, GJB360.7-87 temperature impact test;
6, GJB367.2-87 405 temperature impact test.
7, SJ/T10187-91Y73 series of temperature change test box - a box type
8, SJ/T10186-91Y73 series of temperature change test box - two box type
9, meet the standard IEC68-2-14_ test method N_ temperature change
10, 2424.13-2002 GB/T test method for temperature change test guide
11, 2423.22-2002 GB/T temperature change
12, QC/T17-92 auto parts weathering test general rule
13. The environmental impact assessment of the electrical connector and socket of the 364-32 EIA test program
Copyright©Dongguan Perfect Instrument Co., Ltd.National service phones：400-6677-223 Fax：0769-85818236
Address：2 plant,ShiMeiShangLian temple,WanJiang Area,Dongguan
Address2：MinzhiWu Street N0.147,QingShui area,Taizhong City,Taiwan Province